Asset & Wildlife Protection Cover/Switchgear Bus bar Insulation Cover/busbar connection insualting cover/Insulation Enhancement cover/UE-BBIC-T7

Basic Info

Model NO.	UE-BBIC-T7
HS Code	8547200000
Production Capacity	1000000PCS/Year

Product Description

BBIC-Bus Bar Insulation Connection Cover up to 40.5kV
Bus bar insulation connection cover "UE-BBIC", A wide range of preformed covers are available for most ofsubstation equipment connections. Customised covers can be made simply and economically by forming ourinsulation materials.Installation is easy with no need to disconnect bus bars. Such covers are held in place with UV- stabilizedplastic nuts and bolts, latches or cable ties, and be easily removed for maintenance. Suitable for applicationsup to 40.5kV.Substation equipment is vulnerable to flashovers caused by accidental bridging of phases, or phase to earth.Usually made by birds, animals, vegetation or airborne debris, flashovers can be very expensive in terms ofdamage to equipment, reduced reliability. Most of event of this nature can be prevented by covering the strategicallyvulnerable bare metalwork.Insulation for energized bus components and connections shall consist of tubing, tape, and other devicesthat are factory-engineered to meet applicable switchgear performance requirements. UE bus bar connectioncovers "BBIC" provide high dielectric strength, adequate thermal endurance at bus operating temperatures,and tracking and erosion resistance.

 

Selection guide

Rated voltage	0.6/1(1.2)kV	12~24 kV	36-42 kV
Wall thickness	1mm	1.5-2mm	2.5-3.2mm

Material property

Property	Test method	Typical data
Tensile strength	GB/T 1040	≥5MPa
Elongation at break	GB/T 1040	≥200%
Dielectric strength	GB/T 1408.1	≥12kV/mm (2mm)
Volume resistance	GB/T 1410	≥1012Ω.cm
Water awbsorption	GB/T 1034	<1%

Production

Applications